Fully automatic blood pressure and pulse measurement on the wrist
Arrhythmia detection function
Large, easy to read LCD display
Automatic switch-off function
Description
The wrist blood pressure monitor is used for non-invasive measurement and monitoring of adults' arterial blood pressure. It has simple operations two channels, each with 50 memories. It shows time, date, error warning and battery charge indication. Battery is powered with 2x1.5V AAA batteries.
BENEFITS
This instrument can identify possible heart rhythm disturbance during measurement and if necessary indicates the measurement.
Use it to measure your blood pressure quickly and easily
Storing the results and displaying the progression of readings together with the average.
Suitable for wrist circumference from 13.5 22cm
Classification of values in colored scale
HOW TO USE
Positioning cuff
Bare your left wrist, making sure that the circulation in the arm is not restricted by any clothes etc. that are too tight. Position the cuff on the inside of your wrist
Fasten the cuff with the Velcro fastening so that the upper edge of the monitor is positioned approx. 1 cm below the ball of your thumb
The cuff has to be fitted tightly around the wrist but should not constrict itMeasuring blood pressure
Put on the cuff as described previously and assume the position in which you want to carry out the measurement
Press the User-Switching key to select a memory zone, and press the key 2x to start measurement in the chosen memory zone. After checking the display with all digits lighting up, the monitor will automatically inflate. Following the self-test, during which all display elements briefly appear, the measurement begins. During inflation the device already determines measured values used to estimate the required inflation pressure. If this pressure is insufficient, the device automatically inflates by another 40 mmHg
Then the pressure in the cuff is slowly released and the pulse is measured
When the measurement has been completed, the remaining air pressure is released very quickly. The pulse, the systolic and the diastolic blood pressure are displayed
The device requires approx. 5 seconds to store the determined measured value
You can interrupt measurement at any time by pressing the ON/OFF button
To switch off and release the pressure, press the ON/OFF button again. If you forget to switch off the device, it switches off automatically after approx. 1 minute
Wait at least 5 minutes before taking another measurement. For detailed instruction, kindly read the manual carefully before use