Name: Beurer BM58 Blood Pressure Monitor
Brand: Beurer
SKU: 1001191
Price: 310.00 AED
Availability: InStock

Healthcare Made Easy
Reports at 1 click

+971-800-700-600

EXTRA10

Beurer

Beurer BM58 Blood Pressure Monitor

AED 310

(All prices include VAT)

620 Pts

Only 1 left, order now

Free Delivery within 90 mins

AED 310

Trusted Shipping

100% Secure Payment

Genuine Brands

Overview

Information

Upper arm blood pressure monitor
Having arrhythmia detection function
Large, easy-to-read LCD display
Automatic switch-off function
2x60 memory space

Description

The upper arm blood pressure monitor is used for non¬invasive measurement and monitoring of adults' arterial blood pressure.

BENEFITS

This instrument can identify possible heart rhythm disturbance during measurement and if necessary indicates the measurement
Use it to measure your blood pressure quickly and easily
Stores the results and displays the progression of readings together with the average
Suitable for upper arm circumferences 22-30cm
Touch screen display
Shows average of all saved measured values and morning and evening blood pressure for the last 7 days

HOW TO USE

Positioning cuff
Fit the cuff round your bare left upper arm. Blood circulation in the arm should not be restricted by tight clothing or other objects
The cuff should be placed on the upper arm so that the lower edge is 2 to 3 cm above the bend of the elbow and above the artery. The tube should be in line with the centre of the palm. Now tighten the free end of the cuff, but make sure that it is not too tight around the arm and close the hook-and-loop fastener. The cuff should be fastened so that two fingers can fit under the cuff. Now insert the cuff line into the connection for the cuff connector.
Rest for approx. 5 minutes before each measurement. Otherwise there may be divergences
You can perform the measurement either sitting or lying down. Always make sure that the cuff is on a level with your heart
To carry out a blood pressure measurement, make sure you are sitting comfortably with your arms and back leaning on something. Do not cross your legs. Place your feet flat on the ground
In order not to distort the result, it is important to keep still during the measurement and not talkMeasuring blood pressure
Move the touch screen activation switch to the ON position
Put on the cuff as described previously and assume the position in which you want to carry out the measurement
Switch on the blood pressure monitor with the START/ STOP button . After the full-screen display, the most recently used user memory appears. To change the user memory, press the MEM button and confirm your selection with the START/STOP button. If no button is pressed, the most recently used user memory is automatically used after 5 seconds
Before the measurement, the last saved test result is briefly displayed. If there is no measurement in the memory, the instrument always displays the value
The cuff automatically inflates. Cuff air pressure is released slowly. If a tendency towards high blood pressure is already detectable, the cuff is pumped up again and cuff pressure increased further. As soon as a heart rate is detected, the heart rate symbol is displayed
Heart rate, systolic and diastolic blood pressure are displayed
You can cancel the measurement at any time by pressing the START/STOP button or by pushing the touch screen activation button to OFF
Er_ appears if it has not been possible to perform the measurement properly. Observe the section in these instructions on error messages/troubleshooting and repeat the measurement
The test result is saved automatically